BDSM Restraints Setup: Safe Positioning on Your Motorbunny

By Motorbunny - New Riding Sex Toys and Sex Machines | Published: 2026-11-03

Category: Gör-det-själv-guider

Learn how to set up BDSM restraints on your Motorbunny with safe positioning, quick-release checks, and bondage safety tips for a secure ride.

Quick answer

Secure the Motorbunny unit first, then attach the restraints to its eyelets and adjust the straps so you can move freely but still reach a quick release. Always test the quick-release mechanism before play and keep safety scissors within arm's reach.

Why restraint placement matters with a riding machine

Unlike a static bed or chair, a Motorbunny moves and vibrates, so restraints must accommodate that motion without pulling tight or trapping limbs. Positioning the cuffs higher on the thighs or around the wrists with slack allows you to ride naturally while still feeling bound. Avoid anchoring restraints to the machine's control unit or power cord, as movement could damage the unit or create a tripping hazard.

When to skip full restraint and use a simpler setup

If you're new to bondage or playing solo, start with one cuff or a loose strap rather than full immobilization. Full restraint can make it harder to adjust your position or dismount quickly if the machine's intensity becomes overwhelming. The BDSM Restraints are compatible with all Motorbunny units, but they don't include a safety release clip beyond the strap buckle, so you'll need to keep the quick-release tab accessible at all times.

Step-by-step restraints setup for your Motorbunny

Secure the Motorbunny unit: Place the Motorbunny on a stable, flat surface and ensure it is fully secure before attaching any restraints. Check that the unit does not wobble or slide. A moving machine can pull restraints tight unexpectedly—always stabilize first.
Clip restraints to the eyelets: Attach the restraint clips to the eyelets on the Motorbunny. Make sure each clip is fully closed and cannot slip off during use. Tug gently on each clip after attaching to confirm it is locked.
Adjust strap length for comfortable slack: Extend or shorten the straps so you can sit or straddle the machine without the cuffs pulling tight. You should be able to lift your hands or knees a few inches. Test your range of motion by leaning forward and back before play.
Position cuffs on wrists or thighs: Fasten the soft vegan leatherette cuffs around your wrists or thighs, ensuring the faux-fur liner sits against your skin. Leave enough room to slide one finger under the cuff. Cuffs should feel snug but never restrict circulation—check for numbness or tingling.
Verify quick-release access: Locate the quick-release buckle or strap end and practice releasing it with one hand while in your play position. Keep safety scissors within reach as a backup. If you cannot reach the release easily, loosen the strap or reposition before continuing.

Product facts

BDSM Restraints: BDSM Restraints are one size fits all and feature extendable straps with soft vegan leatherette cuffs and faux-fur liners. The extendable straps let you adjust slack for comfortable positioning on any Motorbunny unit, while the faux-fur liner reduces friction during movement.
BDSM Restraints